Tilting Table
 |
Cast Iron Tilting Table is a useful accessory for setting work at an Angle for Milling or other operations. The Table has Machined T-slots along length and can swing up to 45º on either side. For setting purpose a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The Table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.
SALIENT FEATURES:- Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
- Table top and base are flat and parallel within 0.05 mm per 300 mm
- T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
- T-slots parallel to the edges within 0.05 mm per 300 mm
|
Size in MM
|
Details of T-slots
|
||
|
L x B x H
|
Size of T-slots
|
No. of T-slots
|
Pitch of T-slots
|
|
300 x 150 x 110
|
14
|
3
|
50
|
|
400 x 300 x 200
|
14
|
3
|
100
|
|
450 x 225 x 150
|
14
|
3
|
65
|
|
500 x 500 x 300
|
14
|
4
|
125
|
|
600 x 300 x 200
|
14
|
3
|
100
|
|
1000 x 500 x 300
|
14
|
4
|
100
|
- Other sizes on request